CRAFT RESIN 2L Epoxy Resin for Crafts – Crystal Clear 1:1 Resin
Description
2L Epoxy Resin for Crafts, Resin Art & Creative Projects
CRAFT RESIN 2L is a crystal clear two-part epoxy resin designed for arts, crafts and detailed creative projects where a glossy, transparent finish is required. Supplied as a resin and hardener system with an easy 1:1 mixing ratio by volume, it is a practical choice for makers working on multiple projects or those who need more material than a smaller starter kit provides.
The low-viscosity resin flows readily into silicone moulds, small casting moulds and fine details, making it suitable for creating resin art, coasters, trays, jewellery, keyrings, decorative pieces and other handmade projects. Once cured, the resin produces a clear, high-gloss surface that allows colours, pigments, glitter and embedded decorative elements to remain visible.
CRAFT RESIN 2L at a glance
- Size: 2 litres total resin system
- Mix ratio: 1:1 by volume
- Finish: Crystal clear, glossy and transparent
- Working time: Approximately 35–40 minutes
- Maximum recommended layer: 6mm
- Hard cure: Approximately 24 hours
- Full cure: Approximately 72 hours
- Formula: Low-odour, VOC-free and solvent-free
What Can You Make With 2L Craft Resin?
A 2L epoxy resin kit is useful when you are making several smaller pieces rather than completing a single deep casting. The clear finish makes it particularly useful where the appearance of the finished piece is important.
Resin Art
Create glossy decorative artwork using pigments, mica powders, glitter and other suitable embellishments.
Coasters & Trays
Ideal for casting smaller decorative pieces and creating smooth, glossy surfaces.
Jewellery & Small Pieces
The free-flowing formula is suited to smaller moulds, pendants, charms, keyrings and decorative items.
Silicone Moulds
Pour into suitable silicone moulds to produce detailed shapes and small cast components.
Easy 1:1 Epoxy Resin Mixing
One of the advantages of this craft resin is its straightforward 1:1 mixing ratio. Measure equal volumes of resin and hardener, combine them thoroughly and then pour into your prepared mould or onto your project.
For the best results, mix carefully and avoid introducing unnecessary air into the mixture. Scrape the sides and base of the mixing container while stirring to help ensure the two components are properly combined.
The resin provides approximately 35–40 minutes of working time, giving you time to add colours, arrange decorative elements and complete your pour before the material begins to cure.
Crystal Clear Resin With a Glossy Finish
When cured correctly, CRAFT RESIN produces a transparent, high-gloss finish that can enhance the appearance of decorative projects. Its clarity makes it suitable for projects where you want the colour, pattern or embedded detail beneath the resin to remain clearly visible.
For resin artists and makers, this makes the 2L kit particularly useful for repeat projects such as batches of coasters, jewellery pieces, decorative moulds and small home accessories.
How Deep Can You Pour This Resin?
This is an important consideration when choosing your epoxy resin. CRAFT RESIN Arts & Crafts Resin is intended for relatively shallow pours, with a recommended maximum layer depth of approximately 6mm (1/4 inch).
For deeper casting, river-style projects, thick moulds or applications requiring several centimetres of resin in a single pour, a dedicated deep pour epoxy resin is more appropriate.
If you are looking for a resin for a large tabletop or a thick protective coating, choose a product specifically formulated for that application rather than using this arts and crafts formulation outside its recommended pour depth.
2L Resin for Regular Crafting
The 2L size sits between smaller starter quantities and larger bulk resin kits, making it a useful option for makers who already know they will be completing several projects. It provides enough material for repeated smaller pours without moving immediately to a much larger workshop-sized quantity.
It is particularly suitable for resin artists, hobby crafters, DIY makers, jewellery makers and creative workshops working on multiple pieces.
CRAFT RESIN 2L – Product Information
| Product | CRAFT RESIN Arts & Crafts Epoxy Resin |
| Quantity | 2L |
| Mix ratio | 1:1 by volume |
| Appearance | Crystal clear |
| Finish | High gloss |
| Working time | Approximately 35–40 minutes |
| Recommended maximum layer | 6mm |
| Hard cure | Approximately 24 hours |
| Full cure | Approximately 72 hours |
| Odour | Low odour |
Is This the Right Epoxy Resin for Your Project?
Choose CRAFT RESIN 2L if you need:
- A clear epoxy resin for arts and crafts
- A simple 1:1 mixing system
- Resin suitable for silicone moulds and smaller castings
- A glossy, transparent finish
- Enough resin for multiple creative projects
- A low-odour formulation for suitable home or studio crafting environments
Consider a different resin if you need:
- Deep pours several centimetres thick
- River-style or deep casting projects
- A specialist thick tabletop coating
- A formulation specifically designed for large-volume deep casting
Using Epoxy Resin Safely
Always follow the manufacturer's instructions before use. Wear suitable gloves, protect your working surface and ensure adequate ventilation. Keep resin and hardener away from children, food and drink, and allow finished pieces to cure fully before use.
For consistent results, work within the recommended temperature range, measure accurately and follow the specified mixing and curing instructions supplied with the product.
Buy CRAFT RESIN 2L Epoxy Resin From Plywood ETC
Order CRAFT RESIN 2L Arts & Crafts Epoxy Resin from Plywood ETC for resin art, mould casting, coasters, jewellery, decorative projects and other creative applications. The 1:1 formulation provides a straightforward mixing process, while the clear high-gloss finish is designed to showcase colours and decorative details.
Standard shipping
Estimated delivery time: 1-6 days depending on size & location
Collection available from Leicester LE3
Ready to collect within 24 hours
2L Epoxy Resin for Crafts, Resin Art & Creative Projects
CRAFT RESIN 2L is a crystal clear two-part epoxy resin designed for arts, crafts and detailed creative projects where a glossy, transparent finish is required. Supplied as a resin and hardener system with an easy 1:1 mixing ratio by volume, it is a practical choice for makers working on multiple projects or those who need more material than a smaller starter kit provides.
The low-viscosity resin flows readily into silicone moulds, small casting moulds and fine details, making it suitable for creating resin art, coasters, trays, jewellery, keyrings, decorative pieces and other handmade projects. Once cured, the resin produces a clear, high-gloss surface that allows colours, pigments, glitter and embedded decorative elements to remain visible.
CRAFT RESIN 2L at a glance
- Size: 2 litres total resin system
- Mix ratio: 1:1 by volume
- Finish: Crystal clear, glossy and transparent
- Working time: Approximately 35–40 minutes
- Maximum recommended layer: 6mm
- Hard cure: Approximately 24 hours
- Full cure: Approximately 72 hours
- Formula: Low-odour, VOC-free and solvent-free
What Can You Make With 2L Craft Resin?
A 2L epoxy resin kit is useful when you are making several smaller pieces rather than completing a single deep casting. The clear finish makes it particularly useful where the appearance of the finished piece is important.
Resin Art
Create glossy decorative artwork using pigments, mica powders, glitter and other suitable embellishments.
Coasters & Trays
Ideal for casting smaller decorative pieces and creating smooth, glossy surfaces.
Jewellery & Small Pieces
The free-flowing formula is suited to smaller moulds, pendants, charms, keyrings and decorative items.
Silicone Moulds
Pour into suitable silicone moulds to produce detailed shapes and small cast components.
Easy 1:1 Epoxy Resin Mixing
One of the advantages of this craft resin is its straightforward 1:1 mixing ratio. Measure equal volumes of resin and hardener, combine them thoroughly and then pour into your prepared mould or onto your project.
For the best results, mix carefully and avoid introducing unnecessary air into the mixture. Scrape the sides and base of the mixing container while stirring to help ensure the two components are properly combined.
The resin provides approximately 35–40 minutes of working time, giving you time to add colours, arrange decorative elements and complete your pour before the material begins to cure.
Crystal Clear Resin With a Glossy Finish
When cured correctly, CRAFT RESIN produces a transparent, high-gloss finish that can enhance the appearance of decorative projects. Its clarity makes it suitable for projects where you want the colour, pattern or embedded detail beneath the resin to remain clearly visible.
For resin artists and makers, this makes the 2L kit particularly useful for repeat projects such as batches of coasters, jewellery pieces, decorative moulds and small home accessories.
How Deep Can You Pour This Resin?
This is an important consideration when choosing your epoxy resin. CRAFT RESIN Arts & Crafts Resin is intended for relatively shallow pours, with a recommended maximum layer depth of approximately 6mm (1/4 inch).
For deeper casting, river-style projects, thick moulds or applications requiring several centimetres of resin in a single pour, a dedicated deep pour epoxy resin is more appropriate.
If you are looking for a resin for a large tabletop or a thick protective coating, choose a product specifically formulated for that application rather than using this arts and crafts formulation outside its recommended pour depth.
2L Resin for Regular Crafting
The 2L size sits between smaller starter quantities and larger bulk resin kits, making it a useful option for makers who already know they will be completing several projects. It provides enough material for repeated smaller pours without moving immediately to a much larger workshop-sized quantity.
It is particularly suitable for resin artists, hobby crafters, DIY makers, jewellery makers and creative workshops working on multiple pieces.
CRAFT RESIN 2L – Product Information
| Product | CRAFT RESIN Arts & Crafts Epoxy Resin |
| Quantity | 2L |
| Mix ratio | 1:1 by volume |
| Appearance | Crystal clear |
| Finish | High gloss |
| Working time | Approximately 35–40 minutes |
| Recommended maximum layer | 6mm |
| Hard cure | Approximately 24 hours |
| Full cure | Approximately 72 hours |
| Odour | Low odour |
Is This the Right Epoxy Resin for Your Project?
Choose CRAFT RESIN 2L if you need:
- A clear epoxy resin for arts and crafts
- A simple 1:1 mixing system
- Resin suitable for silicone moulds and smaller castings
- A glossy, transparent finish
- Enough resin for multiple creative projects
- A low-odour formulation for suitable home or studio crafting environments
Consider a different resin if you need:
- Deep pours several centimetres thick
- River-style or deep casting projects
- A specialist thick tabletop coating
- A formulation specifically designed for large-volume deep casting
Using Epoxy Resin Safely
Always follow the manufacturer's instructions before use. Wear suitable gloves, protect your working surface and ensure adequate ventilation. Keep resin and hardener away from children, food and drink, and allow finished pieces to cure fully before use.
For consistent results, work within the recommended temperature range, measure accurately and follow the specified mixing and curing instructions supplied with the product.
Buy CRAFT RESIN 2L Epoxy Resin From Plywood ETC
Order CRAFT RESIN 2L Arts & Crafts Epoxy Resin from Plywood ETC for resin art, mould casting, coasters, jewellery, decorative projects and other creative applications. The 1:1 formulation provides a straightforward mixing process, while the clear high-gloss finish is designed to showcase colours and decorative details.
Can’t Find What You Need?
We have access to all sheet materials across the UK — our friendly sales team will track it down for you. Get in touch today and we’ll make sure you get exactly what you need.