Skip to content
Four natural wood lumber beams stacked in a 2x2 arrangement on a white background, with a dark gray circular badge in the bottom right corner reading 'Pack of 4'.
A C24 Timber structural grade kiln dried wood post shown on a white background with promotional text highlighting its features.
A single C24 structural timber plank shown vertically on a white background with dark blue promotional text and icons. The image includes a circular inset showing a close-up of the smooth regularised wood finish.
A single C24 Timber 47 x 100mm (4 inch by 2 inch) lumber beam is shown diagonally on a light wood deck with a blurred wooden fence background. The left side features a list of product benefits and features in a clean graphic layout.
Stacked C24 Timber 47 x 100mm (4" x 2") structural grade lumber with a large text overlay detailing product specifications and feature icons on the left.
A large stack of C24 Timber 47 x 100mm (4 inch by 2 inch) structural grade lumber beams, shown outdoors on asphalt with a brick building and green hills in the background. The image features text overlays detailing product features (C24 Structural Grade, Kiln Dried, Regularised, Strong & Reliable) and a circular inset showing a close-up of the wood grain texture.
An informational infographic titled 'Size Guide' explaining the difference between nominal size and finished size for timber. It features a line drawing of a wood grain block, a dark blue box labeled 'Finished Size,' and a light gray box labeled 'Nominal Size' with a saw icon.
Specification graphic for slow-grown timber, showing a cross-section of a tree trunk with a circular inset highlighting the wood grain, accompanied by descriptive text about strength and durability.
A C24 Structural Grade timber beam shown diagonally on a white background with promotional text highlighting higher strength than C16, suitability for greater loads, and ideal for wider spans.
Informational graphic for kiln dried timber, featuring a navy blue and yellow circular icon with white steam lines, a small droplet, and text stating 'Moisture is carefully removed from the timber through a controlled kiln drying process.'.
A branded Timber Class Guide infographic explaining timber class choices for different use cases, with icons and a circular diagram showing Class 2, Class 3(u), and Class 4 applications.
Four natural pine wood blocks with square ends, stacked in a 2x2 grid, shown on a clean white background.
Four natural wood lumber beams stacked in a 2x2 arrangement on a white background, with a dark gray circular badge in the bottom right corner reading 'Pack of 4'.
A C24 Timber structural grade kiln dried wood post shown on a white background with promotional text highlighting its features.
A single C24 structural timber plank shown vertically on a white background with dark blue promotional text and icons. The image includes a circular inset showing a close-up of the smooth regularised wood finish.
A single C24 Timber 47 x 100mm (4 inch by 2 inch) lumber beam is shown diagonally on a light wood deck with a blurred wooden fence background. The left side features a list of product benefits and features in a clean graphic layout.
Stacked C24 Timber 47 x 100mm (4" x 2") structural grade lumber with a large text overlay detailing product specifications and feature icons on the left.
A large stack of C24 Timber 47 x 100mm (4 inch by 2 inch) structural grade lumber beams, shown outdoors on asphalt with a brick building and green hills in the background. The image features text overlays detailing product features (C24 Structural Grade, Kiln Dried, Regularised, Strong & Reliable) and a circular inset showing a close-up of the wood grain texture.
An informational infographic titled 'Size Guide' explaining the difference between nominal size and finished size for timber. It features a line drawing of a wood grain block, a dark blue box labeled 'Finished Size,' and a light gray box labeled 'Nominal Size' with a saw icon.
Specification graphic for slow-grown timber, showing a cross-section of a tree trunk with a circular inset highlighting the wood grain, accompanied by descriptive text about strength and durability.
A C24 Structural Grade timber beam shown diagonally on a white background with promotional text highlighting higher strength than C16, suitability for greater loads, and ideal for wider spans.
Informational graphic for kiln dried timber, featuring a navy blue and yellow circular icon with white steam lines, a small droplet, and text stating 'Moisture is carefully removed from the timber through a controlled kiln drying process.'.
A branded Timber Class Guide infographic explaining timber class choices for different use cases, with icons and a circular diagram showing Class 2, Class 3(u), and Class 4 applications.
Four natural pine wood blocks with square ends, stacked in a 2x2 grid, shown on a clean white background.

C24 Timber 47 x 100mm (4x2") Regularised Kiln Dried (45x95mm finish) - Pack of 4

SKU
£28.00 - £35.00
£28.00
£28.00 - £35.00
£28.00
Availability:
in stock, ready to be shipped
Availability:
in stock, ready to be shipped
Description

For internal timber projects that need strength-graded carcassing, this pack combines C24 classification with a regularised working section. The pack contains 4 matching pieces, each 900mm or 1200mm long, with a nominal section of 47 x 100mm and an approximate finished regularised size of 45 x 95mm. Typical uses can include stud partitions, blocking, frame members, supports and general structural carpentry where the section is correctly specified. Each 900mm or 1200mm piece is suited to smaller internal builds where full merchant lengths would create unnecessary waste. Kiln drying helps reduce excess moisture before use, while regularising produces a more consistent finished section for measuring, cutting and fixing. C24 is a structural strength class, so final suitability must follow the required span, loading, fixing method and project specification. Natural characteristics such as knots, grain pattern and shade variation should be expected from piece to piece. Use only in dry, sheltered interior locations because no preservative treatment is applied; exterior and persistently damp applications are unsuitable.

Key Features

  • C24 strength graded timber: Suitable for structural carpentry where the specified section and grade meet the project requirements.
  • Regularised finish: Nominal 47 x 100mm section with an approximate finished size of 45 x 95mm for a more consistent working profile.
  • Kiln dried: Reduced moisture content helps improve dimensional stability and handling during installation.
  • Two length options: Choose 900mm or 1200mm to suit shorter framing, noggins, bracing, trimming and general carpentry tasks.
  • Pack of 4: Convenient multipack for projects requiring matching timber sections.
  • For dry internal use: Untreated timber intended for protected interior construction and not for exposed, persistently damp or ground-contact applications.

Standard shipping

Estimated delivery time: 1-6 days depending on size & location

Collection available from Leicester LE3

Ready to collect within 24 hours

For internal timber projects that need strength-graded carcassing, this pack combines C24 classification with a regularised working section. The pack contains 4 matching pieces, each 900mm or 1200mm long, with a nominal section of 47 x 100mm and an approximate finished regularised size of 45 x 95mm. Typical uses can include stud partitions, blocking, frame members, supports and general structural carpentry where the section is correctly specified. Each 900mm or 1200mm piece is suited to smaller internal builds where full merchant lengths would create unnecessary waste. Kiln drying helps reduce excess moisture before use, while regularising produces a more consistent finished section for measuring, cutting and fixing. C24 is a structural strength class, so final suitability must follow the required span, loading, fixing method and project specification. Natural characteristics such as knots, grain pattern and shade variation should be expected from piece to piece. Use only in dry, sheltered interior locations because no preservative treatment is applied; exterior and persistently damp applications are unsuitable.

Key Features

  • C24 strength graded timber: Suitable for structural carpentry where the specified section and grade meet the project requirements.
  • Regularised finish: Nominal 47 x 100mm section with an approximate finished size of 45 x 95mm for a more consistent working profile.
  • Kiln dried: Reduced moisture content helps improve dimensional stability and handling during installation.
  • Two length options: Choose 900mm or 1200mm to suit shorter framing, noggins, bracing, trimming and general carpentry tasks.
  • Pack of 4: Convenient multipack for projects requiring matching timber sections.
  • For dry internal use: Untreated timber intended for protected interior construction and not for exposed, persistently damp or ground-contact applications.

Can’t Find What You Need?

We have access to all sheet materials across the UK — our friendly sales team will track it down for you. Get in touch today and we’ll make sure you get exactly what you need.

Free Delivery

When you spend £750

Warranty Info

Offering a range of policies

Need Help?

Contact our support team today

Sheet Material Guides

Detailed Answers to Common Questions