Skip to content
Four light natural wood planks stacked diagonally on a white background, with a dark gray circular badge in the lower right that reads 'Pack of 4'.
A C24 Timber 47 x 175mm (7 in x 2 in) kiln dried structural timber post shown on a white background with product feature icons and text on the left.
A C24 Timber 7" x 2" (47 x 170mm) kiln dried structural timber board shown on a white background with product specifications and feature icons on the left.
A rectangular sample of C24 Timber 47 x 175mm (7 inch by 2 inch) kiln dried wood shown on a white background with product specifications and feature icons on the left.
Stacked C24 Timber blocks of natural kiln-dried wood with promotional text overlays highlighting features like 'C24 Timber', 'Regularised Kiln Dried', and four feature icons for C24 Structural Grade, Kiln Dried (Lower Moisture), Regularised Finish, and Strong & Reliable.
A large stack of C24 Timber structural grade kiln dried lumber shown in a construction site setting with graphic text overlays highlighting product features.
Informational graphic for kiln dried timber, featuring a navy blue and yellow circular icon with white steam lines, a small droplet, and text stating 'Moisture is carefully removed from the timber through a controlled kiln drying process.'.
A C24 Structural Grade timber beam shown diagonally on a white background with promotional text highlighting higher strength than C16, suitability for greater loads, and ideal for wider spans.
Specification graphic for slow-grown timber, showing a cross-section of a tree trunk with a circular inset highlighting the wood grain, accompanied by descriptive text about strength and durability.
An informational infographic titled 'Size Guide' explaining the difference between nominal size and finished size for timber. It features a line drawing of a wood grain block, a dark blue box labeled 'Finished Size,' and a light gray box labeled 'Nominal Size' with a saw icon.
A branded Timber Class Guide infographic explaining timber class choices for different use cases, with icons and a circular diagram showing Class 2, Class 3(u), and Class 4 applications.
A stack of four light natural wood boards showing the grain and clean edges, photographed on a white background.
Four light natural wood planks stacked diagonally on a white background, with a dark gray circular badge in the lower right that reads 'Pack of 4'.
A C24 Timber 47 x 175mm (7 in x 2 in) kiln dried structural timber post shown on a white background with product feature icons and text on the left.
A C24 Timber 7" x 2" (47 x 170mm) kiln dried structural timber board shown on a white background with product specifications and feature icons on the left.
A rectangular sample of C24 Timber 47 x 175mm (7 inch by 2 inch) kiln dried wood shown on a white background with product specifications and feature icons on the left.
Stacked C24 Timber blocks of natural kiln-dried wood with promotional text overlays highlighting features like 'C24 Timber', 'Regularised Kiln Dried', and four feature icons for C24 Structural Grade, Kiln Dried (Lower Moisture), Regularised Finish, and Strong & Reliable.
A large stack of C24 Timber structural grade kiln dried lumber shown in a construction site setting with graphic text overlays highlighting product features.
Informational graphic for kiln dried timber, featuring a navy blue and yellow circular icon with white steam lines, a small droplet, and text stating 'Moisture is carefully removed from the timber through a controlled kiln drying process.'.
A C24 Structural Grade timber beam shown diagonally on a white background with promotional text highlighting higher strength than C16, suitability for greater loads, and ideal for wider spans.
Specification graphic for slow-grown timber, showing a cross-section of a tree trunk with a circular inset highlighting the wood grain, accompanied by descriptive text about strength and durability.
An informational infographic titled 'Size Guide' explaining the difference between nominal size and finished size for timber. It features a line drawing of a wood grain block, a dark blue box labeled 'Finished Size,' and a light gray box labeled 'Nominal Size' with a saw icon.
A branded Timber Class Guide infographic explaining timber class choices for different use cases, with icons and a circular diagram showing Class 2, Class 3(u), and Class 4 applications.
A stack of four light natural wood boards showing the grain and clean edges, photographed on a white background.

C24 Timber 47 x 175mm (7x2") Regularised Kiln Dried (45x170mm finish) - Pack of 4

SKU
£51.00 - £64.00
£51.00
£51.00 - £64.00
£51.00
Description

A practical pack of C24 softwood for protected interior construction, supplied in pre-cut lengths to reduce preparation on site. The pack contains 4 matching pieces, each 900mm or 1200mm long, with a nominal section of 47 x 175mm and an approximate finished regularised size of 45 x 170mm. The deeper profile can be used for robust internal framing and support work where calculations and the construction specification call for this section. Each 900mm or 1200mm piece is suited to smaller internal builds where full merchant lengths would create unnecessary waste. Kiln drying helps reduce excess moisture before use, while regularising produces a more consistent finished section for measuring, cutting and fixing. C24 is a structural strength class, so final suitability must follow the required span, loading, fixing method and project specification. Natural characteristics such as knots, grain pattern and shade variation should be expected from piece to piece. Use only in dry, sheltered interior locations because no preservative treatment is applied; exterior and persistently damp applications are unsuitable.

Key Features

  • C24 strength graded timber: Suitable for structural carpentry where the specified section and grade meet the project requirements.
  • Regularised finish: Nominal 47 x 175mm section with an approximate finished size of 45 x 170mm for a more consistent working profile.
  • Kiln dried: Reduced moisture content helps improve dimensional stability and handling during installation.
  • Two length options: Choose 900mm or 1200mm to suit shorter framing, noggins, bracing, trimming and general carpentry tasks.
  • Pack of 4: Convenient multipack for projects requiring matching timber sections.
  • For dry internal use: Untreated timber intended for protected interior construction and not for exposed, persistently damp or ground-contact applications.

Standard shipping

Estimated delivery time: 1-6 days depending on size & location

Collection available from Leicester LE3

Ready to collect within 24 hours

A practical pack of C24 softwood for protected interior construction, supplied in pre-cut lengths to reduce preparation on site. The pack contains 4 matching pieces, each 900mm or 1200mm long, with a nominal section of 47 x 175mm and an approximate finished regularised size of 45 x 170mm. The deeper profile can be used for robust internal framing and support work where calculations and the construction specification call for this section. Each 900mm or 1200mm piece is suited to smaller internal builds where full merchant lengths would create unnecessary waste. Kiln drying helps reduce excess moisture before use, while regularising produces a more consistent finished section for measuring, cutting and fixing. C24 is a structural strength class, so final suitability must follow the required span, loading, fixing method and project specification. Natural characteristics such as knots, grain pattern and shade variation should be expected from piece to piece. Use only in dry, sheltered interior locations because no preservative treatment is applied; exterior and persistently damp applications are unsuitable.

Key Features

  • C24 strength graded timber: Suitable for structural carpentry where the specified section and grade meet the project requirements.
  • Regularised finish: Nominal 47 x 175mm section with an approximate finished size of 45 x 170mm for a more consistent working profile.
  • Kiln dried: Reduced moisture content helps improve dimensional stability and handling during installation.
  • Two length options: Choose 900mm or 1200mm to suit shorter framing, noggins, bracing, trimming and general carpentry tasks.
  • Pack of 4: Convenient multipack for projects requiring matching timber sections.
  • For dry internal use: Untreated timber intended for protected interior construction and not for exposed, persistently damp or ground-contact applications.

Can’t Find What You Need?

We have access to all sheet materials across the UK — our friendly sales team will track it down for you. Get in touch today and we’ll make sure you get exactly what you need.

Free Delivery

When you spend £750

Warranty Info

Offering a range of policies

Need Help?

Contact our support team today

Sheet Material Guides

Detailed Answers to Common Questions